14
You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can
also listen to music from a Bluetooth-enabled device.
Pair the Bluetooth-enabled devices
To connect your Bluetooth device to the unit,you need to pair the device to the unit. Pairing needs
only to be done once. You can pair up to ve devices.
1. Turn on the Bluetooth function on the device.
2. Search for Bluetooth device with the device.
3. Select “M-DVD5562R” in the pairing list.
4. Enter default password“0000”.
If pairing succeeds,phone call record is displayed.
Tip:
• The operational range between this unit and a Bluetooth device is approximately 10 meters (30
feet).
• Before you connect a Bluetooth device to this unit,familiarize yourself with the Bluetooth
capabilities of the device.
• Compatibility with all Bluetooth device is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• Keep this unit away from any other electronic device that may cause interference.
Disconnect Bluetooth device
To disconnect one device,touch [ ] (red).
[
] (Green) is displayed.
Tip
• The device will also be disconnected when the device is moved beyond the operational range.
• If you want to reconnect the device to the unit, place it within the operational range.
• If you do not want to reconnect the device to the unit automatically, touch [
], then touch
[ Auto connect ] until [ Off ] appears after [ Auto connect ]. For details, see the “Adjust Bluetooth
settings” section.
• Touch [
] to delete the paired device from the pairing list.
Make a call
1. Select [Bluetooth] in the home menu.
2. Pair the phone with the unit.
3. Touch [
], [ ] to select the paired phone, touch it to select.
4. Touch [
], [ ] to search for phone number from the following
list:
∙ [Missed calls]
∙ [Received calls]
∙ [Dialed calls]
∙ [Phone book]
Or touch [
] to dial number directly,then touch [ ] to dial.
Bluetooth mode
To Next Page
Loading...
Need help?
General
