CONTROL ELEMENTS
Heating/ventilation/air conditioning
46 Operating manual MT 32 / 36
Heating/ventilation/air conditioning
Control elements <in Radiokonsole>
The control unit for heating and ventilation is installed in the
radio instrument panel.
Fig. 21: Operation
1 Blower switch
2 Temperature regulator
The amount of air can be regulated by means of the blower
switch 1. Three levels are available.
Setting the air flow
X Set the blower switch 1 to:
Level “0” = blower off
Level “3” = maximum blower output
Set the temperature
You can adjust the temperature by means of the temperature
controller 2:
X Set the temperature controller 2 to:
Left = heater off
Right = maximum heat output
Auxiliary heater – optional
Consult the manufacturer's instruction manual for infor-
mation on how to operate the auxiliary heater.