Magellan 200 User Manual

Viewing a Preloaded POI on the Map Screen
POI’s that have been preloaded as part of the background map can be viewed on the Map
screen to assist you in locating the POI.
1. Press
MENU.
2. Use the
Arrow joystick to highlight Pts of Interest.
3. Press
ENTER.
4. Use the
Arrow joystick up/down to highlight Background Map.
5. Use the
Arrow joystick left/right to select Nearest or Alphabetical.
6. Press
ENTER.
7. [Only if Alphabetical selected] Use the
Arrow joystick and the ENTER button to
enter the first few characters of the POI you are searching for. Highlight
OK and
press
ENTER to continue.
8. Use the
Arrow joystick to highlight the POI to be viewed.
9. Press
ENTER.
10. Use the
Arrow joystick to highlight View.
11. Press
ENTER.
12. The Map screen will be displayed in the Cursor mode. The cursor will be directly
over the POI you have selected. You may use the
Zoom buttons to change the scale
of the map displayed and if your position icon is within range, it will be shown.
13. Press
ESC to return to the detail screen of POI’s found in step 8.
Note: Remember that pressing the
NAV button will return you to the last viewed Map
screen. In step 13 if you are finished with the POI’s in the POI database, you
could press
NAV to close the POI database and return to the last viewed Map
screen.
Points of Interest
36

Magellan 200 Specifications

General

Brand	Magellan
Model	200
Category	GPS
Language	English