Setting the Light Timer
As has been mentioned before, the display backlight makes the display easier to read in low
light situations but it also is the largest drain on the batteries. The
1. Press
MENU.
2. Use the
Arrow joystick to highlight Preferences.
3. Press
ENTER.
4. Use the
Arrow joystick to highlight Pwr Management.
5. Press
ENTER.
6. Use the
Arrow joystick to highlight the data field for Light
Timer
.
7. Press
ENTER.
8. Use the
Arrow joystick to highlight the desired time interval
or set to Timer
Off.
9. Press
ENTER.
Preferences
68
Light Timer
30 Seconds
1 Minute
2 Minutes
4 Minutes
10 Minutes
Timer Off
To Next Page
Loading...
