Magellan eXplorist 500 - Setting the Map Units; Selecting Navigational Units of Measure

Preferences
93
Setting the Map Units
In the Map Units option of Preferences you can select which units of measure for navigation
data, the north reference, the coordinate system, and the map datum that will be used by the
eXplorist.
Selecting Navigational Units of Measure
The eXplorist can be set to display navigation data in Miles/Yd/MPH, Miles/Ft/MPH,
NM/Ft/Knots, NM/M/Knots, or KM/KPH.
1. Press
MENU.
2. Use the
Arrow joystick to highlight Preferences.
3. Press
ENTER.
4. Use the Arrow joystick to highlight Map Units.
5. Pr
ess
ENTER.
6. Use the
Arrow joystick to highlight the data field for Nav
Units
.
7. Press
ENTER.
8. Use the
Arrow joystick to highlight the desired navigational units of measure.
9. Press
ENTER.
The
Map Units screen is displayed with the new Nav Units shown. You can change other
settings or press
ESC to return to the Preferences menu.