Magellan eXplorist 500 - Memory Clearing and Defaults

Clearing Memory
The Clear Memory function of Preferences gives you a tool that you can use to globally clear:
• active track history [Track History]
• all user-entered POI’s and routes [
POIs/Routes]
• all multi-leg routes [
Routes]
• all track history, user-entered POIs, and routes [
All]. This resets the eXplorist to its
original factory settings. It will erase all user-created files and folders from the internal
memory. User created files and folders on the SD card will not be touched.
Using Clear Memory, you can also set all of the defaults in the eXplorist to the factory
defaults.
Clearing Active Track History
1. Press MENU.
2. Use the
Arrow joystick to highlight Preferences.
3. Press
ENTER.
4. Use the
Arrow joystick to highlight Clear Memory.
5. Press
ENTER.
6. Use the
Arrow joystick to highlight Track History.
7. Confirm. Use the
Arrow joystick to highlight Yes to confirm or No to cancel.
8. Press
ENTER.
Preferences
101