The Satellite Status screen will continuously update, and you will be
able to graphically see how well your eXplorist is performing.
When the eXplorist has enough information to compute a position fix,
the
Satellite Status screen is replaced with the Map screen. The
arrow cursor in the center of the Map screen represents your
position. As you move, the arrow will point in the direction you are
traveling.
Tip: Use the ZOOM IN and ZOOM OUT buttons to change the
map scale so that you can see your present position better.
If the eXplorist is unable to compute your initial fix in a few minutes: If the eXplorist
determines that it is unable to track the satellites within a few minutes, it will present
you with the following screens in an effort to better determine its
approximate location.
Select Region. Use the arrow joystick to highlight the region that
you are located in. With the region highlighted, press the
ENTER
button.
Select Area. This displays a list of areas for the region you
selected. Use the Arrow joystick to highlight the area that
applies to you, and press the
ENTER button.
Starting Up
12
To Next Page
Loading...
Need help?
General