Magellan eXplorist 510 User Manual

Magellan eXplorist Settings
Magellan eXplorist 510 / 610 / 710 User Manual 42
Selecting North Reference
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the North Reference drop-down menu and
select the north reference.
Setting Altimeter Source
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Altimeter drop-down menu and select
the desired source.
Memory
This setting is used to view memory usage and
provides access to memory tools.
Use SD Card for External Storage
1. Access the Settings Menu.
2. Tap on the Memory button.
3. Tap on the Use SD Card button to use the SD
card for storage. (When checked, the SD card
will be used for external storage.)
Clear Memory from Device
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap on the Clear Memory from Device button
4. Conrm that you want to clear the devices
waypoint, geocache, route memory.
Clear Memory from SD Card
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap on the Clear Memory from SD Card
button.
4. Conrm that you want to clear the SD card’s
waypoint, geocache, route memory.
Restoring Factory Defaults
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap on the Restore Factory Default button.
4. Conrm that you want to restore the factory
defaults.
Setting Primary Coordinate Type
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Primary Coordinate Type drop-down
menu and select the desired measurement.
Setting Primary Coordinate Accuracy
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Primary Coordinate Accuracy drop-
down menu and select the desired accuracy.
Setting Primary Coordinate Datum
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Primary Coordinate Datum drop-down
menu and select the desired datum.
Setting Secondary Coordinate System
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Secondary Coordinate System drop-
down menu and select the desired coordinate
system.
Setting Secondary Coordinate Type
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Secondary Coordinate Type
drop-down menu and select the desired
measurement.
Setting Secondary Coordinate Accuracy
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Secondary Coordinate Accuracy drop-
down menu and select the desired accuracy.
Setting Secondary Coordinate Datum
1. Access the Settings Menu.
2. Tap on the Navigation button.
3. Tap the Secondary Coordinate Datum drop-
down menu and select the desired datum.

Magellan eXplorist 510 Specifications

General

Brand	Magellan
Model	eXplorist 510
Category	GPS
Language	English