Magellan MobileMapper CX - The First Time You Use Mobilemapper CX

English
20
The First Time You Use MobileMapper CX
Please carefully read the procedure outlined in the table be-
low. This procedure is described in detail in the continuation
of this chapter. Please strictly follow the order in which the in-
structions are given.
Note that the procedure was tested for several popular mobile
phone brands and for a European GPRS operator. The proce-
dure should normally apply for any other manufacturer, phone
model and GPRS operator although this cannot be guaran-
teed.
Step Task Detail
1
Ask MobileMapper CX to be
paired with the cell phone.
On MobileMapper CX:
- Start Bluetooth Manager
- Detect the cell phone
- Ask for a paired Bluetooth link
- Enter a PIN code.
2
Allow the cell phone to be
paired with MobileMapper CX
On the cell phone, select the appropriate
command and then enter the same PIN code as
in Step 1.
3
Re-boot Bluetooth Manager on
MobileMapper CX
On MobileMapper CX, exit from Bluetooth
Manager and then re-launch this program.
4
Establish a Bluetooth link
between MobileMapper CX
and the cell phone
On MobileMapper CX:
- List the cell phone’s local services
- Establish a Bluetooth link
- Create a shortcut for future connections.
5
Prepare the GPRS connection On MobileMapper CX
- Start creating a new connection icon
- Enter the GPRS call number
- Finish creating the new connection icon.
6
Establish the GPRS connection On MobileMapper CX:
- Double-tap the new connection icon
- Enter GPRS operator identification data
- Start the GPRS connection.