1. SAFETY RULES AND GENERAL INFORMATION
1.1 RECOMMENDATION FOR USE AND MAINTENANCE
In this manual we put into evidence all the operations for a correct use and ordinary maintenance of the
machine.
We strongly recommend not to make any other type of work repair or operation not suggested in this manual.
We suggest also to keep this manual in a place where the user can easily find and read it.
1.2 MACHINE IDENTIFICATION
The data impressed in the plate placed on the left side of the machine (from the point of view of the operator)
identify the machine itself.
When you eventually order spare parts or ask for any suggestions for use or maintenance, you have always to
transmit the model type and identification number contained in the plate.
It is absolutely forbidden to remove the plate or modify the data it contains.
The following identification plate is placed on the boring system machine described into this manual:
GENERAL INFORMATION ABOUT THE MANUFACTURER
Manufacturer: MAGGI TECHNOLOGY S.r.l.
Address: Via delle Regioni, 299—50052
City: CERTALDO (FI)
Nation: ITALY
Tel. +39 0571 63541
Fax. +39 0571 664275
E-mail: maggi@maggi-technology.com
ANY ADULTERATION OR REMOVAL OF SAFETY PROTECTION DEVICES CAN CAUSE
SEVERE DAMAGE. ANY REMOVAL, EXCLUSION OR MODIFICATION OF THESE
DEVICES IS STRICTLY FORBIDDEN.
YOU MUST VERIFY AND GUARANTEE THE PERFECT RUNNING OF SAFETY DEVICES
BY MEANS OF PERIODIC CHECKS. ANY DEFECT OR PROBABLE DRAWBACK MUST
BE IMMEDIATELY RESOLVED.
To Next Page
Loading...