eURNER
COOKTOF
Topreventstainingor discoloration,clean cooktop after Burnergrates must beproperly
each use.Wipe acid or sugar stains as soon as the positionedbeforecooking. Burner grates
cooktop has cooledasthese stains may discolor or etch aredurablebut may graduallylose their
the porcelain, shinedue to usage and high
Freestandingrangeswith conventionalgas burnerswill temperatures.
feature a lift-up cooktop. Gratesfor the porcelaincooktop are
The cooktop does NOT lift-upon these models: square.When installingsquaregrates,
place indentedsides together so straight
• Freestandingrangewith sealedburner, sidesare atfront and rear.
• Slide-inrangewith eitherconventionalor sealed I
burners. CAUTION:Do not operatea surface burnerwithout a
I
panon the grate.The porcelainfinish on the grate may I
To raise the "lift-up" cooktop:When cool, grasp the chipwithouta panto absorbthe intense heat from the
front edgeof the cooktop and gentlylift up until the two burnerflame.
supportrods, if equipped,atthe front of the cooktopsnap
into place.
,__ Beforereplacingthe lightbulb DISCONNECTPOWERTO
RANGE.Be surethe bulb is cool. Do nottouch a hot bulb
with a dampcloth asthe bulb may break.
_ Toturn on ovenlight: Pushin the rockerswitch located
on the backguardor on the manifold panel.
To replace oven light: Be surebulb is cool. Use a dry
potholder,to prevent possibleharmto hands,and very
To lower the top: Holdthe front edge of the cooktopand carefully unscrew bulb.
carefully push backon each support rod, if equipped,to
releasethe notchedsupport.Then gently lowerthe top _ t(_
into place.The support rodswillslide intothe cooktop /,4
frame. _ .li_ii!)---
Replacewith a40 wattappliance bulband reconnect
powerto the range. Resetthe clock.
To Next Page
Loading...
Need help?
General
