IMPORTANT ABOUT THE SURFACEBURNER FLAME I'
• Be sure all surface burnercontrolsareset in the OFF A properlyadjusted burnerwith clean ports will lightwithin
positionpriorto supplying gas to the appliance, a few seconds.
• Whenthe applianceisfirst installed,the surface On naturalgas, the flamewill be blue with a deeper blue
burners maybe difficult to lightdue to air inthe gas core; there should be no trace ofyellow in the flame.
line.This may alsooccur if the appliance has been
disconnectedfrom the maingas supply or if it has not A yellow flame indicatesan impropermixtureof air/gas.
been usedfor several days or weeks. This wastes fuel, so have a servicemanadjustthe mixture
if a yellowflame occurs.
• Toremovethe air in the gas line,hold a lightedmatch
nextto the burnerhead and turn the knob on. When the On LP gas, someyellow tipping is acceptable.This is
burnerlights, either adjustthe knob tothe desired normaland adjustmentis not necessary.
flamesize or turnthe burneroff.
Youmay hear a "popping"soundon sometypes of gas
when the surface burneris turned off.This is a normal
operatingsound ofthe burner.
Pilotlessignitionuses a sparkfrom the ignitorto light the
burner.There aretwo ignitorsfor conventionalsurface To light surface burner during a power
burners. Eachsealedburner hasits own ignitor.Oncethe
burner lights,turn the knobto the desiredsetting. The failure:
clickingsoundwill not stop until the knob is turned from 1. Be sureallcontrols are in the OFF position.
the LITEposition.
2. Holda lightedmatchto the desiredsurface burner
head.
3. Pushin andturn knobto the LITE position.The burner
Ports will thenlight.
_lgnttor 4. Adjustthe flame tothe desiredflame size.
CAUTION:When lightingthe surfaceburner,be sure
NOTE:The surfaceburner willnot light if the ignitor is all ofthe controlsare in the OFF position. Strikethe
damaged,broken,soiledor wet. Also,the burner willnot matchfirst andhold it in positionbefore turningthe
lightif the smallport beneath the ignitor is blocked.See knobto the LITE position.
page 17for cleaning instructions.
To Next Page
Loading...
Need help?
General
