UGH_NG SURFACE BURNERS ADJUSTING THE F_E
CAUTION:Topreventdamage to the cooktopor pan, Adjustthe flame size so it
never operatesurface burnerwithouta pan in place, does not extend beyond
never allow a panto boil dry and never operatea the edge of the cooking ___
surfaceburner on HIGHfor extended periodsof time. utensil.This is for
personalsafetyand to
To light surface burner: preventpossibledamage
1. Placea pan on the burnergrate, tothe appliance,pan,or
cabinets abovethe
NOTE:The burnerflame may lift off the burner anda appliance.This also improvescooking efficiency.
"roaring" sound may be heardif a pan is not placedon
the grate before lightingthe burner.
2. Pushin andturn knob tothe LITE position.
Pilotlessignition modelsonly: A clicking soundwill be
heardandthe burnerwilllight.Whenoneburneris
turnedon,all fourignitorswillspark.
3. Aftertheburnerlights,turntheknobtothe desired
flamesize.
Pilotlessignition modelsonly: The ignitorswill
continuetosparkuntiltheknobisturnedfromthe LITE
position.
CAUTION: Iftheflameshouldgooutduringa cooking
operation,turnthe burneroff.If gas hasaccumulated
anda stronggasodoris detected,wait5 minutesfor
thegasodortodisappearbeforerelightingburner.
To Next Page
Loading...
Need help?
General
