Pronto 100 ID Card Printer – User Guide
35
Error code 10:9
Reason: The printer received a print job. The power adjustment for one of the panels was out of range. This
probably means the print job file was corrupt.
Error code 10:11
Reason: The printer received a print job. The number of copies specified was less than 1. This means that
the print job file is corrupt.
Error code 10:12
Reason: The printer received a print job containing magnetic track data. The number of encoding attempts
requested was less than one.
Error code 10:13
Reason: The printer received a print job containing magnetic track data. The number of verification attempts
requested was less than zero.
Error code 10:14
Reason: The printer received a print job. The x adjustment specified for a panel was out of range. This
probably means the print job file was corrupt.
Error code 10:15
Reason: The printer received a print job. The y adjustment specified for a panel was out of range. This
probably means the print job file was corrupt.
Error code 10:16
Reason: The printer received a print job. An area or hole setting for one of the panels was missing a required
element. This probably means the print job file was corrupt.
Error code 10:17
Reason: The printer received a print job. An area or hole setting for one of the panels had an out-of-range
value. This probably means the print job file was corrupt.
Error code 10:18
Reason: The printer received a print job. The X coordinate for the HoloCode is out of range. This probably
means the print job file was corrupt.
Error code 10:19
Reason: The printer received a print job. The Y coordinate for the HoloCode is out of range. This probably
means the print job file was corrupt.
Error code 10:20
Reason: The printer received a print job. The module size for the HoloCode is out of range. This probably
means the print job file was corrupt.
Error code 10:21
Reason: The printer received a print job. The margin for the HoloCode is out of range. This probably means
the print job file was corrupt.
To Next Page
Loading...
