Pronto 100 ID Card Printer – User Guide
40
Error code 26:4
Reason: The print engine MCU reported a flip position motor fault while rotating the flipper. Note that this is
the flipper motor which drives the card, not the rotation motor.
Error code 26:5
Reason: The print engine MCU reported a flip rotation motor fault. Note that this is the flipper motor which
rotates the flipper, not the one which drives the card.
Error code 26:6
Reason: The print engine MCU reported a main card drive motor fault.
27: CLEAN REQUIRED
Error code 27:0
Reason: On start-up, the printer detected that it was overdue for cleaning.
28: NO PRINTHEAD
Error code 28:0
Reason: The printhead does not seem to be fitted.
29: NO SD CARD
Error code 29:0
Reason: The internal SD card could not be detected.
31: COLOUR DISABLED
Error code 31:0
Reason: The printer received a colour print job but does not have colour printing enabled.
32: DPI600 DISABLED
33: FILM NO NPANEL
Error code 33:0
Reason: The printer received a job with neutral panel options, but the fitted dye film does not have neutral
panels.
34: FILM NO PPANEL
To Next Page
Loading...
