26
Advanced settings
Advanced
settings
Recall is useful to access certain network and PABX/
switchboard services.
Recall time
The default Colombo recall time is suitable for your
country and network operator and is set at 100 ms.
The use of your Colombo cannot be guaranteed on all PABX.
Call barring
Prevent certain numbers from being dialled from your
Colombo. Store up to four specifi c numbers, each up
to 4 digits, for example, international or local prefi xes.
NOTE
If you switch Call barring on, BARR MODE ON will be
displayed on your screen in standby mode.
To switch call barring on/off
1. Press ‘menu/ok’
,
scroll to ADVANCED SET
and press ‘menu/ok’.
2. Scroll to CALL BARRING. Press ‘menu/ok’.
3. Enter the master PIN (default setting 0000) and
press ‘menu/ok’.
4. MODE is displayed. Press ‘menu/ok’.
5. Press or to select ON or OFF. Press
‘menu/ok’ to confi rm.
6. Press
to return to standby. You can now
set the number (See below).
To set a number to be barred
1. Press ‘menu/ok’
,
scroll to ADVANCED SET
and press ‘menu/ok’.
2. Scroll
to CALL BARRING. Press ‘menu/ok’.
3. Enter the master PIN (default setting 0000) and
press ‘menu/ok’.
4. Scroll
to NUMBER. Press ‘menu/ok’.
5. If necessary, scroll
or to the next available
slot.
6. Press ‘menu/ok’ and enter the number or prefi x
you want to bar. Press ‘menu/ok’ to confi rm.
7. Press
to return to standby.
Colombo UG.indd Sec24:26Colombo UG.indd Sec24:26 24/7/08 17:27:3424/7/08 17:27:34
To Next Page
Loading...