27
Advanced settings
Baby call
When activated, this feature allows you to dial a
number by pressing any key on your handset (except
). This feature is very useful for quick access to
the emergency services.
Switch baby call on/off
1. Press ‘menu/ok’
,
scroll to ADVANCED SET
and press ‘menu/ok’.
2. Scroll
to BABY CALL. Press ‘menu/ok’.
3. Enter the master PIN (default setting 0000) and
press ‘menu/ok’.
4. MODE is displayed. Press ‘menu/ok’ then
press or to select ON or OFF. Press
‘menu/ok’ to confi rm.
5. Press
to return to standby.
NOTE
If you switch Baby call on, BABY CALL ON will be displayed
on your screen in standby mode.
To switch BABY CALL off from standby
1. Press
then ‘menu/ok’
To set the baby call number
1. Press ‘menu/ok’
,
scroll to ADVANCED SET
and press ‘menu/ok’.
2. Scroll to BABY CALL. Press ‘menu/ok’.
3. Enter the master PIN (Default setting 0000) and
press ‘menu/ok’.
4. Scroll
to NUMBER. Press ‘menu/ok’.
5. Enter the number. Press ‘menu/ok’ to confi rm
6. Press
to return to standby.
Dial a baby number
1. When a baby call number has been stored and
the baby call setting switched on, press any key
(apart from
), to dial a number.
NOTE
When baby call is switched on, you can still answer any
incoming call as normal.
ECO mode
To reduce the level or power emissions, you can select
‘ECO mode’ . When the ECO mode is set to ON, the
base transmission power will be reduced.
1. Press ‘menu/ok’
,
scroll
to ADVANCED SET
and press ‘menu/ok’.
2. Scroll to ECO mode. Press ‘menu/ok’.
3. Press
or to select ON or OFF. Press
‘menu/ok’ to confi rm.
You will hear a confi rmation beep and the
handset name on the display will be replaced
with ‘ECO MODE’.
NOTE
With ECO mode set to ON, the handset range will be reduced.
Colombo UG.indd Sec24:27Colombo UG.indd Sec24:27 24/7/08 17:27:3524/7/08 17:27:35
To Next Page
Loading...