33
The Answering machine
To record an outgoing message
1. Press ‘menu/ok’ scroll to ANSW MACHINE and
press ‘menu/ok’.
2. Scroll
to ANSWER MODE and press ‘menu/ok’.
3. Scroll
or to select ANSWER & REC or
ANSWER ONLY and press ‘menu/ok’. Scroll
or
key to select PERSONALISED then press
‘menu/ok’.
4 PLAY is displayed. Scroll
to RECORD MESS.
To delete a personalised outgoing
message
1. Press ‘menu/ok’ scroll to ANSW MACHINE and
press ‘menu/ok’.
2. Scroll to ANSWER MODE and press ‘menu/ok’.
3. Scroll
or to select ANSWER & REC or
ANSWER ONLY and press ‘menu/ok’. Scroll
or
key to select PERSONALISED then press
‘menu/ok’.
4. PLAY is displayed. Scroll to DELETE.
Ring delay
Select the duration of rings before your answering
machine picks up the call. Choose from 2-9 rings or
Toll Saver.
If Toll Saver is selected, then:
• If you have new messages your phone answers
after 2 rings.
• If there are no new messages it will answer
after 4 rings. So you have the option to hang up,
saving the time and cost of a call.
NOTE
Toll Saver mode is not compatible with the BT Call Answering
service.
• If the memory is full, it will answer after 20
rIngs in Answer Only mode.
1. Press ‘menu/ok’ scroll or to ANSW
MACHINE and press ‘menu/ok’.
2. Scroll
to ANSW SETTINGS and press ‘menu/
ok’.
3. RING DELAY is displayed. Press ‘menu/ok’.
4. Scroll
or to select 2-9 rings or TOLL SAVER.
5. Press ‘menu/ok’ to confi rm.
NOTE
When the answer machine is switched off it will still answer
after 20 rings.
Colombo UG.indd Sec21:33Colombo UG.indd Sec21:33 24/7/08 17:27:4224/7/08 17:27:42