28
Registration
Registration
Up to 5 handsets can be registered to one base
station. Additional handsets must be registered to the
base before you can use them.
• The instructions described below apply
specifi cally to your Colombo handset. If you
wish to register another manufacturer’s
handset, the instructions may vary. In this
case, please refer to the manufacturer of the
additional handset.
• The Master PIN is required before you can
register or unregister handsets. The default PIN
is 0000.
To register a handset
At the base:
1. Press and hold the
button on the base
station for at least 3 seconds. You have 90
seconds in which to register a handset.
At the handset:
2. Press ‘menu/ok’ and scroll
to ADVANCED
SET and press ‘menu/ok’.
3. Scroll
to REGISTRATION and press ‘menu/ok’.
4. If necessary, scroll
or to display REGIST.
BASE and press ‘menu/ok’.
5. BASE 1 2 3 4 is displayed and the registered
base number is fl ashing.
6. Enter the number of the base on which you
wish to register your handset. If you have only
1 base station, press 1. If you have 2 base
stations, press 1 or 2, etc.
7. When the display shows PIN----, enter the base
PIN.
8. When the handset registers with the base, it is
assigned a handset number.
To select a base
You can register your Colombo handset with up to
4 bases. Once registered, you can switch between
bases, for example, bases at home and at work.
1. Press ‘menu/ok’ and scroll
to ADVANCED
SET and press ‘menu/ok’.
2. Scroll to REGISTRATION and press ‘menu/ok’.
3. SELECT BASE is displayed. Press ‘menu/ok’.
The available bases are displayed with the
current base number fl ashing.
4. Enter the number of the base you want 1,2,3 or
4 and press ‘menu/ok’. When the base is found
you hear a beep. If not found, the display shows
UNREGISTERED.
Colombo UG.indd Sec5:28Colombo UG.indd Sec5:28 24/7/08 17:27:3724/7/08 17:27:37
To Next Page
Loading...