29
Registration
To unregister a handset
1. Press ‘menu/ok’ and scroll to ADVANCED
SET and press ‘menu/ok’
.
2. Scroll
to UNREGISTER and press ‘menu/ok’
3. Enter the 4 digit master PIN and press ‘menu/ok’.
Display shows the registered handset numbers.
4. Scroll or to select the handset you want to
delete and press ‘menu/ok’. UNREGISTERED
is displayed on the handset screen.
To set the PIN
The 4-digit master PIN is used when registering or
unregistering a handset and when changing some
settings on your Colombo. The default setting is 0000.
You can change this PIN for additional security.
1. Press ‘menu/ok’
,
scroll
to ADVANCED SET
and press ‘menu/ok’.
2. Scroll to PIN. Press ‘menu/ok’.
3. Enter the current 4 digit master PIN and press
‘menu/ok’. (Default setting 0000).
4. Enter the new PIN and press ‘menu/ok’.
NOTE
Make a note of your PIN. If you forget your PIN you will need
to reset your product.
To Reset your Colombo
This will return your Colombo to its factory
default settings.
1. Press ‘menu/ok’
,
scroll to ADVANCED SET
and press ‘menu/ok’.
2. Scroll
to RESET UNIT. Press ‘menu/ok’.
3. CONFIRM? is displayed. Press ‘menu/ok’.
NOTE
Entries stored in the phonebook and new answering
machine messages will not be deleted.
Auto prefi x
You can set the Colombo to detect a dialling number
and replace it with another number. The number to be
detected can be up to 5 digits long. It can be replaced
with a number up to 10 digits.
1. Press ‘menu/ok’
,
scroll
to ADVANCED SET
and press ‘menu/ok’.
2. Scroll to PREFIX. Press ‘menu/ok’.
3. DETECT DIGIT is displayed. Press ‘menu/ok’
.
4. Enter the number you want to be detected (up
to 5 digits) and press ‘menu/ok’.
5. Scroll to PREFIX NUM. and press ‘menu/ok’.
6. Enter the number you (up to 10 digits) want it
replaced with and press ‘menu/ok’.
7. Press
to return to standby.
Note
If you do not enter a number for “Detect Digit” then the
“Prefi x number” will be dialled prior to the number you call,
(useful for access to “lo-cost” telephone service access). To
disable the auto-prefi x function, delete the contents in both
“Detect digit” and “Prefi x number” settings.
The auto-prefi x function will not work if you Press the
before dialling.
Colombo UG.indd Sec5:29Colombo UG.indd Sec5:29 24/7/08 17:27:3824/7/08 17:27:38
To Next Page
Loading...