Lower speed is recommended while slicing soft ingredient to prevent it from pasty,
but if speed is not enough please change to a higher speed.
DO NOT slice frozen meat, it may damage the appliance.
Blades are very sharp, BE EXTREMELY CAREFUL when handling blades, especially
while assembling, disassembling and cleaning after use.
Spatula is for scraping and cleaning the food processor bowl after the appliance
stop operating. DO NOT put the spatula into the feed chute to stir the food while the
appliance is working, it is very dangerous.
Please install the insert blade according to the arrow direction on the blade.
To release the blade, you can apply a gentle pressure on the blade and push in the
opposite direction (avoid to contact the cutting edges ), you can also insert the
raised bottom part of the spatula into round hole of the blade and apply a gentle
pressures in the opposite direction to release the blade.
Install the insert blade according to the
arrow direction on the blade
Release the insert blade and push in
the opposite direction
To Next Page
Loading...
