with a damp sponge.
12. If any trace of the spot remains, repeat the procedure and wipe the area with a
damp sponge and nonabrasive cleaning powder.
13. After drying the blade or disc you can place the chopper blade & drive shaft
assembly in the food processor bowl, keep the appliance or blades are away
from children and with power unplugged .
14. Wipe the exterior housing with a damp cloth and dry the stainless steel housing
to avoid it to get rusted.
15. DO NOT immerse any cord, plug or motor base into water.
Dishwasher safety :
All the parts expect the motor base are dishwasher safety, but some parts are very
small, we suggest you to clean small parts by running water, if you place the small
parts in the dishwasher, please make sure they could be firmly placed on the top rack
or else the plastic parts may contact high temperature heating tubes indirectly or
directly by strong impact of the water flow and due to high temperature of the
heating tubes the plastic parts may melt !
The blades are sharp, be careful cleaning or holding the shredding blades or
chopper blade.
Contact with the edge of the blade may cause lacerations.
Make sure all parts are thoroughly dry before reassembling.
Salt water can corrode and rust the stainless steel parts, please always clean and
dry the stainless steel parts after using.
To Next Page
Loading...
