Magnetek Flex Duo - 4.2 Receiver Status Indications; 4.3 Receiver Power Indications; 4.4 Receiver COM Indications

Flex Duo Operator Manual
August 2021
Page 19
4.2 Receiver Status Indications
4.3 Receiver Power Indications
4.4 Receiver COM Indications
Type Display Type (Green & Red) Indication
1 Fast green blinks Decoding in process
2 Slow green blinks Decoding on standby
3 2 red blinks Receiver MAIN relays jammed or defective
4 3 red blinks Decoding processors defective
5 4 red blinks Receiving RF defective
6 Fast red blinks Incorrect transmitter serial number
7 Solid red Receiver low voltage
8 No light displayed Decoding processors defective
9
3 slow red blinks followed by
slow green blinks
STOP button pressed down
Type Display Type (Red) Indication
1 On Power to receiver
2 Off No power to receiver
Type Display Type (Red) Indication
1 On Power to relay board
2 Off No power to relay board