Flex Duo Operator Manual
August 2021
Page 8
2.4 Safety Information and Recommended Training for Radio-
Controlled Equipment Operators
Anyone being trained to operate radio-controlled equipment should possess as a minimum the following
knowledge and skills before using the radio-controlled equipment.
The operator should:
• have knowledge of hazards pertaining to equipment operation
• have knowledge of safety rules for radio-controlled equipment
• have the ability to judge distance of moving objects
• know how to properly test prior to operation
• be trained in the safe operation of the radio transmitter as it pertains to the crane, hoist, lifting device or other
mobile hydraulic equipment being operated
• have knowledge of the use of equipment warning lights and alarms
• have knowledge of the proper storage space for a radio control transmitter when not in use
• be trained in transferring a radio control transmitter to another person
• be trained how and when to report unsafe or unusual operating conditions
• test the transmitter machine stop and all warning devices prior to operation; testing should be done on each
shift, without a load
• be thoroughly trained and knowledgeable in proper and safe operation of the crane, hoist, lifting device, or
other mobile hydraulic equipment that utilizes the radio control
• know how to keep the operator and other people clear of lifted loads and to avoid “pinch” points
• continuously watch and monitor status of lifted loads
• know and follow cable and hook inspection procedures
• know and follow the local lockout and tagout procedures when servicing radio-controlled equipment
• know and follow all applicable operating and maintenance manuals, safety procedures, regulatory
requirements, and industry standards and codes
The operator shall not:
• lift or move more than the rated load
• operate the material handling equipment if the direction of travel or function engaged does not agree with what
is indicated on the controller
• use the crane, hoist or mobile hydraulic equipment to support or transport people
• lift or carry any loads over people
• operate the crane, hoist or mobile hydraulic equipment unless all persons, including the operator, are and
remain clear of the supported load and any potential pinch points
• operate a crane, hoist or lifting device when the device is not centered over the load
• operate a crane, hoist or lifting device if the chain or wire rope is not seated properly in the sprockets, drum or
sheave
• operate any damaged or malfunctioning crane, hoist, lifting device or other material handling equipment
• change any settings or controls without authorization and proper training
• remove or obscure any warning or safety labels or tags
• leave any load unattended while lifted
• leave power on the radio-controlled equipment when the equipment is not in operation
To Next Page
