Mahindra 3616 - Emission Control Warranty Coverage; Warranted Parts and Duration; Claims, Exclusions, and Costs

5
TORQUE SPECIFICATION
Use the following torques unless otherwise
specifi ed.
NOTE: The bolts and nuts used are "Met-
ric" sizes, be sure to use metric tools.
Be careful to use bolts and nuts of correct
sizes and thread pitches when assembling
this tractor.
NOTE: Nominal size is shown in the "size"
column.
25mm
10mm
(1
in = 25.4 mm)
(Example) M10x25mm Bolt