FRONT WHEEL REMOVAL
Lift the front wheel off the ground by
placing a support block under the engine.
Remove the speedometer cable (1 ) by
unscrewing lock screw (2)
Disconnect the front brake cable by removing
Remove the axle nut (5).Pull out the axle and
remove the wheel
Reverse the removal procedure.
brake adjuster nut (3) from the brake arm.
Remove frontbrake anchor plate (4)
from LH suspension.
Rotate the wheel and check speedometer
operation.
FRONT WHEEL FITMENT
Axle Nut Torque - 5.5 kgf-m
48
3
4
2
1
5
To Next Page
Loading...