Mahindra Centuro - Rear Wheel Removal

REAR WHEEL REMOVAL
To raise the rear wheel off the ground
Remove the rear brake adjusting nut (1)
and disconnect the brake rod (2) from the
brake arm (3) by pushing down the brake
pedal.
Remove the axle nut (7).Pull out the axle and remove the wheel
Reverse the removal procedure.
By removing the lock nut. (6 )
disconnect the torque link (4) from brake plate (5).
Adjust the rear brake.
REAR WHEEL FITMENT
Axle Nut Torque - 5.5 kgf-m
place a support under engine .
Apply brake several times and check free
wheel rotation when brake is released .
49
7
3
2
4
5
6
1