Diagnostic Manual MAN-00183
MAXXIMO MINIVAN VX June 2012/Rev 1
The reproduction, translation, transmission, in part of or whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution. © 2012 Mahindra &
Mahindra Ltd.
50
CRANKSHAFT SPEED SENSOR
COMPONENT LOCATION
SL NO DTC DESCRIPTION
1
P0336 Crankshaft failure due to wrong crankshaft signal
2
P0335 Crankshaft failure due to no crankshaft signal
NORMAL OPEARTION
When engine is running, the crankshaft speed sensor outputs a signal voltage based upon the speed of the engine.
ECU checks whether the output signal is within the specified range.
COMPONENT DESCRIPTION
The Crankshaft shaft speed sensor is an inductive type sensor. It is located on the crankcase. It uses the
trigger wheel fitted on the crankshaft for reference and senses the speed of the engine. The output signal
of the sensor varies with respect to the change in engine speed
To Next Page
Loading...
