© Copyright Mahindra and Mahindra Ltd. 112020
13-11
1133..55..33 TTeemmppeerraattuurree CCoonnttrrooll
By operating the temperature control knob, temperature of air
being discharged from various vents can be adjusted to the desired
level. Engine coolant is utilized to heat, whereas the air conditioner
is used to cool the air inside the AC unit. Based upon selected
position of the temperature control dial, the desired discharged air
temperature can be obtained.
By rotating the dial counter-clockwise and setting it to the extreme
left position, maximum cooling is obtained. When the dial is rotated
clockwise, the discharged air progressively starts getting warmer
and at the extreme right position, hot air is discharged.
1133..55..44 AAiirr IInnttaakkee MMooddee CCoonnttrrooll
The air intake control button toggles between fresh air or
recirculated air modes.
FFrreesshh AAiirr MMooddee ((OOuuttssiiddee AAiirr MMooddee))
To set the HVAC system to fresh air mode, keep the air intake
control switch in the OFF condition. The lamp on this switch is OFF,
indicating that the fresh air mode is active. In this mode, fresh air
from outside the vehicle is sucked by the blower and utilized further
to ventilate/cool/ heat the cabin.
HHEEAATTIINNGG,, VVEENNTTIILLAATTIIOONN AANNDD AAIIRR--CCOONNDDIITTIIOONNIINNGG SSYYSSTTEEMM ((HHVVAACC)) ((IIff eeqquuiippppeedd))
To Next Page
Loading...
