6-4
© Copyright Mahindra and Mahindra Ltd. 112020
66..22 HHeeaadd RReessttrraaiinntt
Your vehicle seats are equipped with head restraints which are
vertically adjustable. The purpose of these head restraints is to help
limit head motion in the event of a collision.
Always align top of the head restraint with the top of your head or
as close to it as possible. To raise/lower the head restraint, press
the lock tab and pull/push the restraint up/down.
The head restraint can be pulled out completely by depressing the
locking button while pulling the restraint out. To put it back, align the
head restraint shafts over the holes on the seat top and push the
restraint straight down till you hear the lock click.
Keep the seat back as upright as possible so the headrest is
behind, not beneath, and almost touching your head.
Never drive with the head restraints not properly adjusted,
head restraints removed or inserted in a flipped condition. With
no support behind your head, your neck could be seriously
injured in a collision.
66..33 CCoo--DDrriivveerr LLiifftt && SSlliiddee sseeaatt ((IIff eeqquuiippppeedd))
Step 1 : Pull the shoulder knob to unlatch the seat
Step 2 : Push the seat to slide forward
SSEEAATTSS AANNDD SSEEAATT BBEELLTTSS
To Next Page
Loading...
Need help?
General
