14-10
© Copyright Mahindra and Mahindra Ltd. 112020
• To shift from the “P” position to another position, the ignition
switch must be turned to “ON” and the brake pedal should
be depressed. Any forcible attempts to move the selector
lever from “P” without the two procedures may damage the
selector lever
1144..77..33 RR :: RReevveerrssee ppoossiittiioonn
Use this position to reverse the vehicle
To shift into 'R' from 'N', completely stop the vehicle, depress the
brake pedal and press the Knob button and to shift from 'N' to 'R'.
• Never shift into “R” when the vehicle is moving
• Please note that the vehicle may slowly move rearward when
the selector lever is at “R”
1144..77..44 NN :: NNeeuuttrraall ppoossiittiioonn
At this position, the engine does not transfer power to the wheels
and the vehicle will not move on a flat road. However, for safety,
apply the brake when the gear is in this position.
• Warm up the engine for approximately 3 minutes when the
ambient temperature is below -15° C. Otherwise, shifting of
gears in Forward or Reverse direction may not be smooth
• Never shift into “N” from the “D” position or vice versa when
the vehicle is moving, or the transmission will be damaged
• If you have to stop on a hill and would like to use this neutral
position, depress the brake pedal firmly
• Never attempt to move the gear selector lever to “N” when
the vehicle is in motion
SSTTAARRTTIINNGG AANNDD DDRRIIVVIINNGG TTHHEE VVEEHHIICCLLEE
To Next Page
Loading...
