© Copyright Mahindra and Mahindra Ltd. 112020
17-5
1.
Pull the catcher locks from the hood mounting bracket to
release the hood as shown in the image
2. Lift the hood.
3. Support the hood by the stay rod
• Do not open the hood immediately after a drive; the engine
compartment will be very hot
• Always double check to be sure that the hood is firmly
latched before driving away. If it is not latched properly, the
hood could open while the vehicle is being driven, causing a
total loss of visibility, resulting in an accident
• Do not move the vehicle with the hood in the raised position,
as vision is obstructed
Parking of Engine Hood on Windshield is not recommended and
may damage Windshield frame, Glass and Hood.
Park the Engine Hood with Stay rod.
Follow the below steps to close the hood;
1. Remove the stay rod from the hood panel and place it in the
retaining clip.
2. Lower the hood slowly and allow it to fall by its own weight.
3. Firmly press the catcher locks in the hood mounting bracket.
This ensures that locks the hood in its fully closed position
MMAAIINNTTEENNAANNCCEE
To Next Page
Loading...
