© Copyright Mahindra and Mahindra Ltd. 112020
17-37
• Remove the bulb connector
• Remove rear dust cover from the head lamp
• Press and slightly pull up the lock pin to unlock the bulb.
• Remove the bulb from the head lamp assembly
• Insert the new bulb (of the same wattage), and follow the reverse
procedure to assemble the bulb in the headlight assembly
Do not touch the new bulb with your fingers. Oil contamination
will severely shorten bulb life. If the bulb comes in contact with
any oily surface, clean the bulb with rubbing alcohol.
To avoid burning yourself, do not replace the light bulbs when
they are hot. Halogen bulbs have pressurized gas inside and
are to be handled with special care. Mishandling it may cause
the bulb to burst or shatter. Hold the bulb with its metal/plastic
holder/base and do not touch the glass part with bare hands.
Using bulbs with units of higher output capacity/wattage is
illegal and may damage your vehicle’s electrical system.
Replacement bulbs must meet the specification of originally
fitted bulbs.
MMAAIINNTTEENNAANNCCEE
To Next Page
Loading...
