Maico easyTymp - Page 24

Operation Manual easyTymp
8111254 Rev. 9
22
17/01/2018
The easyTymp comes with different components (see the following tables). The
availability of configurations with the following components is country and version specific.
Contact your local distributor for more information.
Components
easyTymp Handheld Unit
MAICO Impedance Module Bundle
Probe*
Short extention cable (350 mm incl. cable)*
Cradle Kit (component list, see below)
Printer Kit (component list, see below)
Power Supply Unit (5 V/2.5 A) UE24WCP-050250SPA
incl. USB Adapter for easyTymp Handheld Unit
Rechargeable Battery
Eartip Box (See Below)
Probe Cleaning Kit
Test Cavity
Operation Manual
Quick Guide
Carrying Case
Wall Mount Kit for cradle with integrated eartip box, power supply unit and additional
rechargeable battery
Only for Plus and Pro Version
Contra Probe (1400 mm incl. cable)*
CIR55 (Contralateral Earphone)*
DD45C (Contralateral Headset)*
IP30 Contralateral Earphone*
Quick Guide (Pro or Plus Version)
*Applied parts according to IEC 60601-1
Cradle Kit
Cradle
USB Cable
Power Supply (24 V/1 A) UE24WCP-240100SPA
Rechargeable Battery
Printer Kit
MPT-II printer
MPT-II rechargeable battery pack
Thermal printer paper
Printer Power supply/charger with plug adapters (12 V/1 A) UE15WCP1-120125SPA
Licenses
Licenses
License for High Frequency Probe Tone of 1 kHz
License for Plus Version: Acoustic Reflexes Contra
License for Pro Version: Acoustic Reflexes Contra, Decay and ETF
NOTE: License for Plus and Pro version: An upgrade to the device version is required.