Maico easyTymp User Manual

Operation Manual easyTymp
8111254 Rev. 9
30
17/01/2018
Charging Light Indicators
Table 5 MLP-II Charging Light Indicator
Green LED indicator
Blue LED indicator
Status
Sound
Note
Off
Fast flash
Charging
-
Power On
Off
On
Charging
-
Power Off
Off
Slow flash
Battery nearly
discharged
-
-
Off
On
Charging
completed
-
Power On
Off
Off
Charging
completed
-
Power Off
On
Off
Power ON,
battery
powered
-
-
Slow flash
Slow flash
Out of paper
Beep
-
Slow flash
Off
Sleep mode
-
-
Self-test
When printer is powered off, press and hold paper feed button, then press and hold power
button simultaneously. When beep is heard after approx. 3 seconds, release both buttons,
and a test page will print with information on current status and character samples.
4.4.2 Paper Loading
Open the lid by pushing on the sides (Figure 36), insert paper roll as shown (Figure 37),
and close the lid (Figure 38).
Figure 36
Figure 37
Figure 38
Paper feed
When powered press paper feed button. Paper will feed as long as the button is pressed.
NOTE: Reorder paper from MAICO or your local distributor.
4.4.3 Connecting the MPT-II Thermal Printer to easyTymp
The connection of the easyTymp and the printer is made via wireless pairing. See section 5.6.5.
NOTE: It is possible to pair four devices with one printer. Do not have several printers powered
on and within range while searching.

Maico easyTymp Specifications

General

Brand	Maico
Model	easyTymp
Category	Medical Equipment
Language	English