Maipu MP1900X Series User Manual

MP1900X Series Router Installation Manual Router Installation
copyright2019 Maipu, all rights reserved
3-5
3 Router Installation
3.1 Install Router
Based on different installation positions, the router can be installed in the following two
modes:
 Install the router to the workbench.
 Install the router to the cabinet.
3.1.1 Install Router to Workbench
Place the router on the clean workbench. Pay attention to the following operation
during the installation:
 Ensure the stability and well-grounding of the workbench.
 There is 10cm heat dissipation space around the router.
 Do not place heavy things on the router.
3.1.2 Install Router to Cabinet
This section describes how to install the MP1900X series router to the 19-inch standard
cabinet.
Installation Preparations
 MP1900X series router is 1U high, so ensure that enough installation space is
reserved for the router.
 Check the grounding and stability of the cabinet and ensure that there is no
obstacle inside and around the cabinet affecting the router installation.
 1U is 44.45mm. Here, U is short for Rack Unit.
Install Slide to Cabinet
The slide supports the router weight. If a slide is already on the cabinet, skip this

Maipu MP1900X Series Specifications

General

Brand	Maipu
Model	MP1900X Series
Category	Network Router
Language	English