Maipu MP1900X Series User Manual

MP1900X Series Router Installation Manual Router Maintenance
copyright2019 Maipu, all rights reserved
6-1
6 Router Maintenance
6.1 Change Interface Daughter Card
 The interface daughter card of MP1900X series router is the RM2B card.
 The interface daughter card of MP1900X series router does not support hot-swap.
Step 1: Power off the router.
Step 2: Use a Phillips screwdriver to loosen the captive screws of the interface daughter card.
Use two hands to hold the captive screws of the interface daughter card and pull out it to
enable the interface daughter card to separate from the inbuilt connector of the router.
Figure 6-1 Loosen the captive screw
Step 3: Pull out the interface card along the slot guide smoothly.

Maipu MP1900X Series Specifications

General

Brand	Maipu
Model	MP1900X Series
Category	Network Router
Language	English