Major 4200 - Page 43

39www.major-equipment.com
PRO-CUT BLADE SYSTEMS - on 6000, 8000, 12000, 12FT3PL & 18000 Models from April 2009
NOTE: Please have the serial number of your machine to hand when ordering blades to ensure you get the correct parts.
MACHINE MODEL: 6000, 12000, 12FT3PL & 18000GR
MACHINE MODEL: 8000
MACHINE QTY
6000 2 OFF (1 each direction)
12000GR 4 OFF (2 each direction)
12000GR 3PL 4 OFF (2 each direction)
18000GR 6 OFF (3 each direction)
MACHINE QTY
8000 2 OFF (1 each direction)
Item Part No Description Qty
1 1/2F 1/2” Nyloc Nut 6
2 DF-BMP BLADE MOUNT 1
3 M20 M20 NYLOC NUT 2
4 FWM20 M20 FLAT WASHER 4
5 12T-LBB Overlap Blade Bushing 2
6 NTSB12C Overlap Blade 2
7 9GTB/A Blade anti clockwise 2
8 9GTB/C Blade clockwise 2
9 M20X60BZP M20x60 BOLT 2
10 12X212FBZP 1/2”x2 1/2” FINE BOLT 4
11 12x114FBZP 1/2”x1 1/4” FINE BOLT 2
12 12T-BBS BLADE BACK SPACER 4
13 BLDB-335 BLADE BACK 2
Item Part No Description Qty
1 1/2F 1/2” Nyloc Nut 6
2 DF-BMP BLADE MOUNT 1
3 BLDB-623 BLADE BACK 2
4 M20 M20 NYLOC NUT 2
5 FWM20 M20 FLAT WASHER 4
6 12T-LBB Overlap Blade Bushing 2
7 NTSB12C Overlap Blade 2
8 9GTB/A Blade anti clockwise 2
9 9GTB/C Blade clockwise 2
10 M20X60BZP M20x60 BOLT 2
11 12X212FBZP 1/2”x2 1/2” FINE BOLT 4
12 12T-BBS BLADE BACK SPACER 4
13 12x114FBZP 1/2”x1 1/4” FINE BOLT 2