MAJORITY GIRTON - Clock and Date Setting; Manually Setting the Time

14
Once the radio has been put into DAB/DAB+ mode, the time and
date should automatically set. If this does not happen or you
wish to alter the time and date, follow the below guidance:
Manually Setting the Time
Ensure the unit is turned on and out of standby.
To enter radio settings, press and hold the ‘Info/Menu’ button
(Ref.).
Turn the ‘Tune/Snooze/Enter’ dial (Ref.) to scroll to “Time/Date”
and press the ‘Tune/Snooze/Enter’ dial (Ref.) to conrm your
the time and date settings.
Once these settings are selected, the hour will now ash on the
display screen. Alter the time hour by turning the ‘Tune/Snooze/
Enter’ dial (Ref.) until the required hour is displayed. Press down
the dial conrm the hour.
The minutes will then ash on the display screen. Choose the
minutes by turning the ‘Tune/Snooze/Enter’ dial (Ref.). Press
down the dial to conrm the minutes.
The time is now set and you will be able to alter the date in the
next step.
Clock and Date Setting
Instrucons Guide