5
Instrucons Guide
Press the ‘Power/Mode’ button (Ref.) to switch to DAB/DAB+
Radio.
Fully extend the antenna (Ref.).
To start an auto scan for available digital stations, press the ‘Scan’
button (Ref.) and then release. This would be advisable if you
are having trouble listening to particular stations.
Once you have chosen to scan, the radio will display “Full Scan”
as it starts scanning up the frequency band. Once the scan is
complete, the rst radio station with good signal will begin to
play.
To browse through the stations that have been found and
stored, turn the ‘Tune/Select/Enter’ dial (Ref.) to scroll through
stations. Once you have found your desired station, press the
‘Tune/Select/Enter’ dial (Ref.) to conrm your choice.
The radio will display station information when you press
the ‘Info’ button (Ref.). Press it multiple times for dierent
information. See page 10 for further details.
When you power up the radio again after switching o, it will
automatically tune to the same station (DAB or FM) that was last
selected.
DAB / DAB+ Radio