MAJORITY GIRTON - Instructions Guide; Basic Operation

4
Please note all (Ref.) refer to the Controls and Functions mapping
guide on Pages 1-2.
For mains power, insert the power supply connector into the
power input socket labelled DC 5V (Ref.) on the back of the
system and plug the power supply into the mains. Alternatively,
you can power the radio with 4 x 1.5C batteries in the battery
compartment (Ref.).
Ensure the Antenna (Ref.) is extended as far as possible so that
you can rotate it, enabling you to get the best signal that you
can.
Press the ‘Power/Mode’ button (Ref.) to turn on the unit.
The system will show “Welcome to Digital Radio” on rst use and
should automatically go to DAB/DAB+ radio. To begin scanning
for available stations, select the ‘Scan’ button (Ref.).
Standby or O
To place the system in standby mode or to switch it o, press
and hold the ‘Power/Mode’ button (Ref.). The display will
show “Standby or Power O”. Turn the ‘Tune/Select/Enter’ dial
(Ref.) to select your choice. Press the ‘Tune/Select/Enter’ dial
(Ref.) to conrm your choice. To turn o completely, switch o
at the mains. The cord must be out of reach of children.
Basic Operation
Instrucons Guide