9
Instrucons Guide
FM Radio
Press the ‘Standby/Mode’ button (Ref.) multiple times to switch
between DAB, FM and Bluetooth. The rst time you switch to
FM mode, the FM frequency “87.5 MHz” will be displayed on the
screen.
Fully extend the antenna (Ref.).
To scan for the available stations with good signal up the
bandwidth, press the ‘Scan’ button (Ref.) for the radio to begin
scanning up the frequency band. The next available station with
good signal will then begin to play.
To scan down the frequency band, press and hold the ‘Scan’
button (Ref.) for a few seconds for the station down the
frequency band with good signal.
How to tune a specic frequency manually
To listen to a specic frequency press and hold the ‘>>’ button
(Ref.) to search up the bandwidth quickly and hold the ‘<<’
button (Ref.) to search down quickly. It will stop searching
when the button is released.
To search slowly, press ‘<<’ or ‘>>’ (Ref./4) multiple times to
scroll through.
Stereo and Mono
When on FM mode, press the ‘Enter/Snooze’ button (Ref.) to
switch between Stereo and Mono mode.
To Next Page
Loading...
Need help?
General
