Make Mendel RapidBot Mega User Manual

MAKE MENDEL Page 1
RapidBot Mega 3D Printer
RapidBot Mega is a latest generation 3D printer, capable of printing 3D objects of PLA plastic.
RapidBot Mega uses high quality Linear motion guides. So it is very easy to build. Self locking
design ensures rigid frame with easy steps(Without need of any measurements, during building)
Any person can easily build it by following our Manual.
If you have any queries or requests related to RapidBot Mega 3D Printer, Kindly drop a mail at :
support@makemendel.com, Our team will be ready to help you, and to answer your querries.

Make Mendel RapidBot Mega Specifications

General

Brand	Make Mendel
Model	RapidBot Mega
Category	3D Printers
Language	English

Summary

Introduction and Specifications

Printer Overview

Introduces the RapidBot Mega 3D printer and its PLA plastic printing capability.

Technical Specifications

Details machine size, build volume, nozzle diameter, layer thickness, speed, and weight.

Key Features

Highlights linear motion guides, compact design, stability, and build volume for ease of use.

Parts and Hardware

Mechanical Parts List

Lists all mechanical components with quantities and corresponding drawings for assembly.

Hardware Components

Enumerates all required hardware, including screws, nuts, and washers, with quantities.

Assembly Guide

Assembly Overview Diagram

Visual representation of the printer assembly with numbered parts for reference.

Step 1: Frame Assembly

Instructions to assemble the front, back, and side plates into the main printer frame.

Step 2: Y Plate Assembly

Guides the installation of motors, rails, and belts onto the Y plate component.

Step 3: Z Mechanical Switch Assembly

Details the mounting process for the Z axis mechanical switch.

Step 4: X Plate Assembly

Instructions for assembling the X plate with its associated rails, bearings, and motor.

Attaching Belt to Extruder Base Plate

Procedure for securing the GT2 belt onto the Extruder Base Plate.

Step 5: Assembly of Rods

Guides the correct placement and assembly of threaded and smooth rods.

Step 6: Printbed Assembly

Details the wiring of heater blocks and the connection of thermistors for the printbed.

Step 7: Electrical Wiring

Provides guidance on connecting the Printrboard REV D for electrical operation.

Printer Usage and Views

Printrboard Electronics Usage

Instructions for setting up and using the Printrboard electronics with Pronterface.

Printer Views

Illustrates the back, left, and right side perspectives of the completed 3D printer.