EasyManua.ls Logo

Make Noise SOUNDHACK MORPHAGENE - Morphagene Button Combinations; Basic Recording Operations; Splice Manipulation Functions

Make Noise SOUNDHACK MORPHAGENE
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Button Combinations
8
Below is a list of all the real-time procedures performed using button press combinations on the Morphagene.
Note that single presses of the REC, Splice, and Shift buttons are all that is needed for a great deal of performative
functionality. Additional combos” allow much more detailed editing, recall, etc. but are not necessary for the practical use of the
module.
Note: Single button press actions take place upon release of the button except for Record Stop. For example, Record Into Same
Splice begins when the REC Button is released, not the moment it is pressed. This allows for multi-button combinations to work
without accidentally initiating the single-button action.
Function / / Button Combination:
Auto Leveling: Hold REC Button, Press Shift Button. Enables Auto Leveling. Measures incoming signal and sets gain to Normalize
while Recording. Option: Continue to hold the REC Button for a “Rolling Listen.
Mount microSD Card: Press Shift Button. Loads inserted microSD when unmounted.
Enter Reel Mode: Hold Splice Button, Press REC Button: Enters Reel Mode (microSD must be mounted)
Organize Panel Control and CV: Selects Reel. The last Reel (Pink/White pulsing) creates a
new Reel upon exiting Reel mode
Hold Splice Button, Press REC Button: Exits Reel mode
Hold Shift, Press REC Button: Deletes current Reel including all Splices and audio.
Deleting last Reel exits Reel Mode and creates new Reel.
Removing microSD: Exits Reel Mode
Record into Current Splice: Press REC Button. Records into current Splice. If no Splices are present, records into a new Splice.
During recording, Press REC Button again to stop active recording. Note: if the total Reel length of 2.9 minutes is reached,
recording stops automatically.
Record into New Splice: Hold REC Button, Press Splice Button. Records into new Splice at end of Reel.
Create New Splice Marker: Press Splice Button. Creates new Splice Marker at current playback location.
Increment Splice: Press Shift Button. Increments to next Splice.
Delete Splice Marker: Hold Shift Button, Press Splice Button. Deletes Splice Marker, joining current Splice with next Splice.
Delete All Splice Markers: Hold Shift Button, Press+Hold Splice Button for 3 seconds. Deletes all Splice Markers, leaving entire
Reel loaded in a single Splice.
Delete Splice Audio: Hold Shift Button, Press REC Button. Deletes Splice Audio.
Clear Reel: Hold Shift Button, Press+Hold REC Button for 3 seconds. Deletes all Splice Markers, clears all Splice audio, empties
current Reel.
Note: With a Clock patched to the Play Input, cannot Delete Splice Marker, Splice Audio, All Splice Markers, or All Splice
Audio. With a Clock patched to Shift Input, it is dicult to reliably Record. When alternately recording and deleting
audio, it is a good idea to wait for the Shift Button to stop ashing before proceeding.

Related product manuals