BOXER SERIES 10-20 KVA PRODUCT DESCRIPTION
AG-SD-109 Publishing Date: 13.10.2015 Revision No: 0 Rev. Date:
The mains, output, bypass, battery, inverter, DC bus and alarms can be displayed on this menu.
Mains
VP, A Hz Voltage (phase-neutral), current and frequency of each phase.
KW, KVA, PF Active power, reactive power and power factor of each phase.
Pt, St, VL Total active power and apparent power, voltage of each phase
(phase-phase).
Output
VP, A, Hz Voltage (phase-neutral), current and frequency of each phase.
KW, KVA, PF Active power, reactive power and power factor of each phase.
Pt, St, %L Total active power, total apparent power and load, in percentage,
of each phase.
VL, CF Voltage of each phase (phase-neutral) and crest factor.
Bypass
VP, A Hz Voltage (phase-neutral), current and frequency of each phase.
VL Voltage of each phase (phase-phase).
Battery
A, °C, V, Charge% Charge flow, temperature, voltage and charge percentage.
SXXXX, DD/MM/YY, Test type number, date and time. Batter capacity and status.
SS: DD, Capacity, Status
Next Test, time Next test date and count down for battery test in floating status.
Temperature
°C,°C,°C,°C,°C Rectifier, inverter, Bypass, ambient and battery temperatures.
Inverter
VP, A, KW Voltage (phase-neutral), current and active powers of each phase.
DC Bus
P, N Positive bus voltage, Negative bus voltage.
Alarms Active UPS alarms.
2.4.7 Setup Menu
The following adjustments can be performed via setup menu:
To Next Page
Loading...
