MakerBot Replicator - Page 3

makerbot.com/docs/replicator 3
WELCOME!
Hello, and congratulations on your purchase of The Replicator™

! Soon, with the help of this

or, as it’s more commonly known, 3D.


You have already proven your wisdom and intelligence by purchasing The Replicator. Still, we
highly recommend that you read this manual before unpacking
easier to start your adventure into the third dimension.
makerbot.com/docs/replicator.
HOW TO UNPACK THE REPLICATOR™

time and be just as careful unpacking it. In this section, the names of important parts and acces-
sories will be in bold type. As you unpack, keep the following warning in mind:
-

Replicator.
You’ll be able to see the top of The Replicator now, as well as some cardboard boxes and packing
material. The large box with a thick black cable leading into it is the Accessory Box, where you’ll
Stepstruder
®
MK8 and other crucial things. Leave it in place for now.
Remove the inner cardboard box.
Do not force or tear anything out of place —
this may damage The Replicator.
Do not grasp The Replicator
by the black cable.