4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DPV300
Maximum capacities Wool pad 80 mm
Sponge pad 80 mm
Sanding disc 50 mm
Backing pad diameter For sanding 46 mm
For polishing 75 mm
No load speed (n
0
) /
Rated speed (n)
High (2
):
sanding mode
0 - 9,500 min
-1
Low (1 ):
polishing mode
0 - 2,800 min
-1
Spindle thread (internal)
Overall length with BL1860B 160 mm
Rated voltage D.C. 18 V
Net weight 1.3 - 1.6 kg
without notice.
-
Applicable battery cartridge and charger
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18SH / DC18WC
residence.
WARNING: Only use the battery cartridges and chargers listed above.
Intended use
paint.
Noise
-
Model
Sound pres-
sure level
(L
pA
) : (dB(A))
Sound power
level (L
WA
) :
(dB(A))
Uncertainty (K) :
(dB(A))
76 - 3
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING: Wear ear protection.
WARNING: The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
WARNING:
or such to workpieces (thin sheets of metal or
other easily vibrating structures with a large sur-
face) to prevent them from emitting sound.
Take the increased noise emission into consider-
ation for both the risk assessment of noise expo-
sure and selecting adequate hearing protection.
To Next Page
Loading...
Need help?
General
