Makita DUC256PG2 Repair Manual

10 / 32
6-2-2 Assembling
Fig. 16
1 Assemble Front hand guard complete [2] to
Housing set [1].
2 Assemble Front hand guard retainer [3] to Front
hand guard complete [2] with M4x12 Pan head
screws [4] (2 pcs).
Tips
Apply the specified grease to the sliding portion of
Front hand guard complete [2].
Fig. 17
3 Assemble Hand guard guide [2] and Compression
spring 3 [3] to Housing set [1].
Tips
 Push Compression spring 3 [3] to the bottom with a
slotted screwdriver.
 Apply the specified grease to the tip of Hand guard
guide [2].
[2]
[1]
[2]
[3]
[1]
[2]
[4]
[2]
[3]
[3]

Makita DUC256PG2 Specifications

General

Chain Pitch	3/8"
Vibration Level	2.5 m/s²
Power Source	Battery
Bar Length	25 cm (10")
Chain Speed	0-20 m/s
Oil Tank Capacity	200 ml