Makita DUP362PT2 User Manual

16 ENGLISH
Trouble shooting
Beforemakingarequestforrepairs,checkfortrouble
byyourself.Ifanyabnormalityisfound,controlyour
tool according to the description of this manual. If the
remedymentionedbelowcannotsolvetheproblem,ask
your local authorized service center for repair. Never
tamper or dismount any part contrary to the description.
State of
abnormality
Probable cause
(malfunction)
Remedy
Theshearblade
does not move
even after pull-
ing the switch
trigger.
Thebatteryis
low.
Chargethebattery.
I/O switch is "Off"
position.
Press the I/O switch to
"I" position.
The shears are
locked.
Unlocktheshearsby
performing the steps in
"Switch action".
Connection cord
is loose.
Check the connecting
pointsoftheswitchbox
and shears of connec-
tion cord.
I/O switch is “on”
position when
insertingthebat-
tery cartridge.
Press the I/O switch
to the “O” (off) position
once, and press the I/O
switch to the “I” (on)
position again.
Switch trigger
defect.
Stop using the tool
immediately, and ask
your local authorized
service center for
repair.
The shear
bladesarestuck
onthebranch.
Thebranchistoo
thick.
Release the switch
trigger. Press the I/O
switch to "O" position.
Thenpulltheblades
straight out slowly from
thebranch.
The switch
trigger is locked
andcannotbe
pulled.
Shearbladesare
openedforcibly.
Switch off and on with
the I/O switch. (The
uppershearblade
closes slightly when
switching on.)
The cut is not
smooth.
Theshearblades
are dull.
Sharpen the shear
blades,oradjustblade
clearance.
Theshearblades
are worn out.
Replace the shear
blades.
To maintain product SAFETY and RELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Uppershearblade
• Uppershearblade(forhardbranch)
• Uppershearblade(forthinbranch)
• Lowershearblade
• Lowershearblade(forhardbranch)
• Lowershearblade(forthinbranch)
• Platexingbolt(forthinbranch)
• Bladetighteningbolt(forthinbranch)
• Catcher(holdingpickedoweraftercutting.)
• Diamondle
• Armband
• Holster
• Cord holder
• Makitagenuinebatteryandcharger
NOTE:Someitemsinthelistmaybeincludedinthe
tool package as standard accessories. They may
differ from country to country.

Makita DUP362PT2 Specifications

General

Brand	Makita
Model	DUP362PT2
Category	Power Tool
Language	English