2
SPECIFICATIONS
Model .......................................................................................................... LS1214/LS1214F
Blade diameter .................................................................................................. 305 mm (12”)
Hole diameter..................................................................................................... 25.4 mm (1”)
Max. Miter angle........................................................................................Left 47° , Right 52°
Max. Bevel angle........................................................................................ Left and Right 45°
Max. Cutting capacities (H x W)
(Note)
* mark indicates that a wood facing with the following thickness is used.
No load speed (RPM)............................................................................................. 3,200/min.
Dimensions (L x W x H) .............. 723 mm x 520 mm x 696 mm (28-1/2” x 20-1/2” x 27-1/2”)
Net weight ...................................................................................................... 23 kg (50.7 lbs)
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
Miter angle
Bevel angle
45° (left) 0° 45° (right)
0°
*71 mm x 260 mm
(2-13/16” x 10-1/4”)
66 mm x 305 mm
(2-5/8” x 12”)
*120 mm x 270 mm
(4-3/4” x 10-5/8”)
115 mm x 308 mm
(4-1/2” x 12-1/8”)
*50 mm x 260 mm
(2” x 10-1/4”)
45 mm x 305 mm
(1-3/4” x 12”)
45° (left and right)
(left)*71 mm x 155 mm
(2-13/16” x 6-1/8”)
66 mm x 170 mm
(2-5/8” x 6-11/16”)
(right)*71 mm x 175 mm
(2-13/16” x 6-7/8”)
66 mm x 215 mm
(2-5/8” x 8-1/2”)
*120 mm x 185 mm
(4-3/4” x 7-1/4”)
115 mm x 218 mm
(4-1/2” x 8-5/8”)
*50 mm x 175 mm
(2” x 6-7/8”)
45 mm x 215 mm
(1-3/4” x 8-1/2”)
52° (right) -
*120 mm x 160 mm
(4-3/4” x 6-5/16”)
115 mm x 185 mm
(4-1/2” x 7-1/4”)
-
Miter angle Thickness of wood
0° 20 mm (13/16”)
45° (left and right) 15 mm (9/16”)
52° (right) 15 mm (9/16”)
To Next Page
Loading...
Need help?
General
